Features and making process of Gas Pre-Filtration Pleated Filter Cartridge

Views : 350
Author : indrofiltermachine.com
Update time : 2019-06-27 17:59:43
Features and making process of Gas Pre-Filtration Pleated Filter Cartridge

Gas Pre-Filtration Pleated Filter Cartridge
Making process and machines:
Making process is Pleats making-length cutting-cap welding.
Gas pre-filtration pleated filter cartridges are made of SIIC-M025
pleated filter cartridge production line, including pleating machines and cap welders, length cutter.
 
Features& Specifications
Made Up Of Ultra-Fine Glass Fiber And Imported Non-Woven Fabric.
Graded Pore Size Change Provides Super High Pollutant Capacity, With Excellent Retention Ability For Particles In Gases.
Outstanding Chemical Compatibility, High Porosity And Low Pressure Drop.
Good Absorbability And High Filtration Efficiency.
Filter Media: Micro Glass Fiber
Hardware: Polypropylene
Center Core: Polypropylene
Supporting Material: Polypropylene
End Caps: Polypropylene
Gasket/O-Rings: SiliconeBuna-NVitonEPDM. Teflon
Outside Diameter2.67”<68mm>
Length: 5”~40”<127mm~1016mm>
Retention Ratings: 0.010.30.5μm Absolute
Maximum Differential Pressure: 75psid (5.1bar)@68(20)
40psid (2.8bar)@150(65)
Applications
Compressed Air For Oil Removal And Particle Filtration          
Pretreatment For Fermentation Air, Etc.