Pleated Series Filter Cartridges specs and making machines

Views : 3501
Author :
Update time : 2019-06-26 15:25:00
Pleated Series Filter Cartridges specs and making machines
Consisting Of Polypropylene Materials, Many Layers Pores Structure Provide Stability Performance
Without Using An Adhesive,Minimizing The Pollution Caused By The Extraction Medium
High Flow,Low Resistance,High Dirt Holding Capacity 
High Surface Area -High Flow Rates And Long Service Life Redeuced Maintenance Costs 

Materials Of Construction:
Filter Media:                                    Polypropylene
Hardware/Center Core:                            Polypropylene 
Surpport Layers:                                 Polypropylene
End Caps:                                        Polypropylene
O-Rings:                                         EPDM,Viton,Silicone,Buna-N,Teflon Encapsulated Viton
Outside Diameter:                                 2.67"(68mm)
Lengths:                                          9.75" To 40"(248mm To 1016mm)

Retention Ratings:                                0.1,0.22,0.45,0.8,1,2,3,5,10,20,30μm
Maximum Differential Pressure:                           75 Psid(5.1 Bar)@ 68
                                                         40 Psid(2.8 Bar)@150
Recommended  Change Out Differential Pressure:     35 Psid(2.4bar)
Making Machines:

Pleated Series Filter Cartridges are made by SIIC-M025 pleated filter cartridges production line from filter media pleating, middle seam welding, pleats cutting to end cap welding.
Electronic Industry:  Pre-Filtration For Industry High,Purity Water 
Food And Beverage Industry:Wine,Mineral Water,Potable Water Etc.
Oil Industry:Oil-Field Flooding Filtration
Medicine Industry: Medicine Liquid,Biologicals,Medicinal Solvent Etc. 
Chemical Industry:Various Organic Solvent 
Acid Liquid And Alkaline Liquid